有毒气体检测仪应该如何做好后期维护 有毒气体检测仪是检测有毒气体的浓度,使探头和测试环境是必要的沟通,所以钢厂工业的有毒气体和尘埃进入有毒气体检测器是不可避免的

What should be noted for the toxic gas detector. Toxic gas detector in the user process of toxic gas detector, install air-conditioning and toxic gas detector near the heating equipment, when using air-conditioning and heating equipment in this process

Specification and maintenance of toxic Gas detecto The common faults of the fixed-type toxic gas detector are the improper use of the equipment, lack of understanding of the performance of the toxic gas detector, improper selection of equipment, no construction according to specifications, and improper maintenance.

How to use and install toxic gas detecto The toxic gas detector consists of a toxic gas detector probe and a toxic gas detector control host, which is widely used in the petrochemical industry, such as petroleum, natural gas, chemical industry, oil depot and other toxic gas.

Precautions for installation of toxic gas detecto 1. There shall be no strong electromagnetic field (such as high-power motor, transformer, etc.) around the toxic gas detector to influence the operation of the instrument.

How to correct toxic Gas detecto 1. After the zero-point adjustment is switched on, the gas detector probe is operated for 30 minutes in the clean air (or nitrogen), and the "zero potentiometer" on the circuit board is adjusted so that the digital display value of the gas detector instrument is zero.

What are the requirements for selecting a gas detecto 1. When the user selects the gas detector, the user is applied to commercial and industrial enterprises, and the gas alarm control system is established, the main selected fixed type gas detector, the gas detector alarm controller and the portable gas detection device are used,

Why should canteen restaurant install gas detector. In the commercial field, gas detector alarms are mainly used in restaurants, canteens and steel mills to prevent disasters caused by toxic gases exceeding the standard.

What are the specifications for the installation of the gas detecto 1. The gas detector needs to set up the emergency cut-off valve to control the gas leakage, at the same time, the emergency cut-off valve should take into account that the influence range should be as small as possible and the operation should be reliable.

What are the installation regulations of alarm control device for gas detecto In the local, commercial and industrial enterprises where the user uses the gas detector, a gas detector alarm control system, a main selection gas detector and an alarm controller host are established,